Tantaly Auto Temperature Control USB Heater
1. Before using the heating element, please check the product and the power cord for cracks, deformations or breaks.
2. Plug the USB plug of the heating element into a 5V - 2A adapter for power supply.
3. Apply an appropriate amount of lubricant and slowly insert the heating rod into the doll's canal.
4. Once the heating element is turned on, the indicator light will remain on continuously. When the temperature reaches 112℉, the indicator light will go out and operation will stop. When the temperature is below 112℉, the indicator light will light up again and heating will continue.
5. After heating is complete, unplug the adapter first and then the USB plug.
6. After use, wait for the product to cool to room temperature and then clean it with clean water or rub it with alcohol.
Important instructions
1. Use an adapter with an output of 5V - 2A.
2. You can clean the area around the connection between the heating element and the cable with water, but do not immerse the heating element completely.
3. Avoid heating the product for more than 30 minutes (depending on the actual ambient temperature, the heating time may vary).
4. Avoid contact with corrosive disinfectants, cleaning agents or solvents.
5. After cleaning and drying, store the product in a cool and clean place.
6. Keep the heating element out of the reach of children.
Your order will be ready for dispatch within 48 hours (in stock) and benefits from free shipping service with an estimated delivery time of 6-10 working days. We support delivery services from DPD, DHL, UPS and GLS. Additional charges may apply if your address is outside the EU. Click here to learn more about shipping information to experience.
*If you are from one of the following regions, you can click on the corresponding link to make a purchase:
US: tantaly.com
UK: tantaly.co.uk
CA: tantaly.ca
* For pre-order products, the shipping time is determined according to the countdown of the product. Due to customs clearance and other issues, the countdown might be adjusted.
data protection packaging
If your privacy is important to you, it is just as important to us. All packages are sealed and discreetly packed in plain boxes, without any Tantaly marking and without any images or text that could reveal the contents of your order. Click hereto learn more.
Echtes und gemütliches Tunnelerlebnis
Der Heizstab von Tantaly erreicht innerhalb kurzer Zeit eine Temperatur von 40 °C. Das Aluminiumlegierungsmaterial an der Oberseite verbessert die Wärmeleitfähigkeit und erwärmt die Tiefen des Durchgangs der Puppe. Bereits 5–10 Minuten sorgen für ein behagliches, umhüllendes Gefühl.
Durchdachte Sicherheitsmaßnahmen
Das Produkt verfügt über eine interne elektronische Thermostatplatine. Bei einer Erwärmung auf 40 °C erlischt die Kontrollleuchte, und wenn die Temperatur unter 40 °C fällt, leuchtet die Leuchte wieder auf. Selbst wenn der Stecker längere Zeit eingesteckt bleibt, steigt die Temperatur nicht übermäßig an.
Wasserdichtes Design
Mit der Wasserdichtigkeitsklasse IPX4 hält es dem Wasserfluss stand, und die Kabelschnittstelle wurde wasserdicht gemacht, um das Eindringen von Feuchtigkeit zu verhindern und so eine lange Lebensdauer zu gewährleisten.